hi-sincerity microelectronics corp. spec. no. :hsk200802 issued date : 2008.10.28 revised date : page no. : 1/3 hsk4001 thru hsk4007 hsmc product specification HSK400X series 1.0amp. surface mount rectifiers features ? low forward surge current ? ideal for surface mouted applications sod-123fl ? low leakage current mechanical data ? case:jedec sod-123fl,molded plastic over passivated chip. ? terminals:solder plated, solderable per mil-std-750, method 2026 ? polarity: color band denotes cathode end ? weight: 0.006 ounces, 0.02 gram . ? mounting position: any. maximum ratings and electrical characteristics rating at 25 c ambient temperature unless otherwise specifi ed. single phase, half wave, 60hz, resistive or inductive load. for capacitive load, derate current by 20%. hsk hsk hsk hsk hsk hsk hsk 4001 4002 4003 4004 4005 4006 4007 units device marking code d1 d2 d3 d4 d5 d6 d7 maximum recurrent peak reverse voltage v rrm 50 100 200 400 600 800 1000 v maximum rms voltage v rms 35 70 140 280 420 560 700 v maximum dc blocking voltage v dc 50 100 200 400 600 800 1000 v maximum average forword rectified current @t a =75 i (av) 1 a peak forward surge current 8.3ms single half-sine-wave superimposed on rated load i fsm 25 a 5.0 maximum dc reverse current @t a =25 at rated dc blocking voltage @ta=125 i r 50.0 a measured at f=1mh z ,v r =4.0v typical junction capacitance c j 15 p f typical thermal resistance junction to lead r jl 20 / w operating temperature range t j - 55 --- + 150 storage temperature range t stg - 55 --- + 150 note1: pulse test: pulse width 300 sec,duty cycle 2%.
hi-sincerity microelectronics corp. spec. no. :hsk200802 issued date : 2008.10.28 revised date : page no. : 2/3 hsk4001 thru hsk4007 hsmc product specification characteristics curve
hi-sincerity microelectronics corp. spec. no. :hsk200802 issued date : 2008.10.28 revised date : page no. : 3/3 hsk4001 thru hsk4007 hsmc product specification sod-123fl dimension dimensions in millimeters *:typical important notice: ? all rights are reserved. reproduction in whole or in part is prohibited without the prior written approval of hsmc. ? hsmc reserves the right to make changes to its products without notice. ? hsmc semiconductor products are not warranted to be suitable for use in life-support applications, or systems. ? hsmc assumes no liability for any consequence of customer prod uct design, infringement of paten ts, or application assistance. head office and factory : ? head office (hi-sincerity microelectronics corp.) : 10f.,no. 61, sec. 2, chung-shan n. rd. taipei taiwan r.o.c. tel : 886-2-25212056 fax : 886-2-25632712, 25368454
|